Disc harrow DAN appears the best unit for resource-saving tillage to a depth of up to 18 cm.
Perform basic resource-saving soil treatment to a depth of 5 to 18 cm. Ensure uniform distribution of organic fertilizers and plant residues throughout the depth of the treated soil layer, creating an optimal structure for plant growth, increase moisture absorption by the soil and reduce erosion, crush lumps. Contribute to the preservation of moisture and level the topography of the field. Aggregates are used for minimal, conservative and traditional tillage.
DAN STANDART – a classic serviceable rack for disc harrows, the design of which has already proven itself as a reliable choice for many years.
The structure of the rack is already familiar to everyone, a press oil box and a number of distance and sealing rings are used, which reliably connect the entire mechanism of the rack and prevent the penetration of dust, water and dirt into the bearing unit.
Also, unlike analogues, higher-quality bearings produced in Slovakia are used in the bearing unit, which extends their service life many times even on the heaviest types of soils.
The DAN disc harrow has a number of design advantages over its counterparts, namely:
1. High-quality bearings are used in the bearing unit of the rack, as well as a modern cassette seal, which ensures working until the disks are completely worn out without disassembling the bearing unit! The buyer has a choice of three options for the bearing assembly of the rack, as well as two options for the location of the discs.
2. The reduced step of the location of the disks and their optimal location parameters ensure: high-quality tillage of the soil with an even bed, less wear of the disks than in analogues and a greater service life of the aggregates.
3. The roller design uses UCF-308 bearings or maintenance-free Peer bearings. Rollers are offered in three versions:
- from the corner;
- from the strip;
- from the pipe.
The cats have an increased radius, which minimizes clogging.
4. Two holes are provided for connection to the tractor for the central drive, which ensures compatibility with tractors of various models without modifying the unit.
5. Brackets for fastening and adjusting the position of the roller have a one-piece design, which reduces the load on the rear beam of the main frame of the unit and increases reliability.
6. The distance between the support roller and the rear row of discs has been increased.
7. The use of high-quality anti-corrosion paint and primer ensures the stability of the units of the unit to aggressive conditions during operation.
Soil treatment with DAN-type harrows has the following agronomic advantages:
1. The transformation of harvest residues into nutrients for plants is accelerated, thanks to their grinding and mixing in the upper layer of the soil.
2. Leveling the topography of the soil allows you to improve the quality of sowing and the speed of harvesting crops, as well as to minimize equipment breakdowns.
3. Moisture is preserved in the soil due to the presence of harvest residues, broken capillaries and rolling of the top layer of the soil.
4. Soil microorganisms are always in natural conditions and actively improve the biochemical state of the soil, increasing the amount of humus - the key to high soil fertility.
A bountiful harvest to you!!!
